Glossary Categories
Glossary Catalog
a
b
c
- Calibrated Risk Matrix
- California Accidental Release Prevention (CalARP)
- California Environmental Protection Agency (CalEPA)
- Category (ISO 13849-1)
- Cause and Effect Matrix
- Certification Body (CB)
- Chemical and Downstream Oil Industries Forum (CDOIF)
- Chemical Safety Board (CSB)
- Common Cause Failure (CCF)
- Competency Management System (CMS)
- Competent Person
- Confidence Level
- Continuous Mode
d
e
f
- Factory Acceptance Test (FAT)
- Failure Modes and Effects Analysis (FMEA)
- Failure Modes, Effects, and Diagnostic Analysis (FMEDA)
- Failure Rate (λ)
- Fault Tree Analysis (FTA)
- Final Element
- Five Nines of Reliability (99.999% Uptime)
- Fixed Programming Language (FPL)
- Flammable Gas
- Flammable Liquid
- Flashpoint
- Full Variability Language (FVL)
- Functional Narrative
- Functional Safety Assessment (FSA)
- Functional Safety Management (FSM)
h
i
l
m
- Machinery Safety
- Main Interlock List (MIL)
- Major Accident
- Markov Model
- Maximum Experimental Safe Gap (MESG)
- Maximum Permitted Repair Time (MPRT)
- Mean Detection Time (MDT)
- Mean Repair Time (MRT)
- Mean Time Between Failure (MTBF)
- Mean Time to Fail Spurious (MTTFsp)
- Mean Time to Failure (MTTF)
- Mean Time to Restore (MTTR)
- Mechanical Integrity Program (MI)
- MIC Ratio (Minimum Ignition Current)
- Mode of Operation
n
p
- PDS
- PEAR Model - People, Environment, Asset, Reputation
- Performance Level (PL)
- Physical Failure
- Piping and Instrumentation Diagram (P&ID)
- Pre-Startup Safety Review (PSSR)
- Prior Use
- Probability of Failing Safely (PFS)
- Probability of Failure on Demand (PFD)
- Probability of Failure per Hour (PFH)
- Probable Loss of Life (PLL)
- Process Flow Diagram (PFD)
- Process Hazard Analysis (PHA)
- Process Lifecycle Management - PLM System
- Process Safety
- Process Safety Information (PSI)
- Process Safety Management (PSM)
- Process Safety Time (PST)
- Product Safety Manual
- Programmable Electronic System (PES)
- Proof Test
- Proof Test Coverage (Cpt)
- Proof Test Interval (TI)
- Proven In Use
r
s
- Safe Failure Fraction (SFF)
- Safe Failure Percent (% Safe Failures)
- Safety and Environmental Management System (SEMS)
- Safety Instrumented Function (SIF)
- Safety Instrumented System (SIS)
- Safety Integrity Level (SIL)
- Safety PLC
- Safety Requirements Specification (SRS)
- Safety Torque Off (STO)
- Semi-Quantitative Risk Analysis
- SIL Certificate
- SIL Declaration of Conformity
- SINTEF
- SIS Safety Lifecycle
- Site Acceptance Test (SAT)
- Site Integration Test (SIT)
- Smart Logic Module
- Spurious Trip Rate (STR)
- Stated Risk
- Stated Risk Tolerance
- Systematic Capability
- Systematic Failure
t